21
2024-03-21
Results Brief | Coupled Paddle–Rudder Control Study of the “Black Pearl” Unmanned Surface Vehicle
Summary:
I. Introduction
The new-generation paddle–rudder integrated “Black Pearl” Unmanned Surface Vehicle developed by HydrovoX is equipped with an additional propeller thruster on the basis of the traditional single-rudder “Black Pearl” Unmanned Surface Vehicle, forming a coupled paddle–rudder control system. This design significantly improves the maneuverability of the platform, which plays a crucial role in station-keeping, heading control, and path tracking, thereby providing strong support for marine monitoring and resource exploration tasks.
The “Black Pearl” paddle–rudder integrated Unmanned Surface Vehicle can not only convert wave energy into forward propulsion like conventional Unmanned Surface Vehicles, but also utilize solar energy to supply power for navigation control systems and onboard sensors. In theory, this enables unlimited-duration and wide-area marine operations.
However, the system inherits the sensitivity of traditional dual-body Unmanned Surface Vehicles to environmental disturbances. In addition, the interaction between the rudder and the propeller introduces strong nonlinear effects, leading to uncertainties in the control of the system. This study investigates the influence of the coupling effect between the rudder and propeller on the yaw motion of the “Black Pearl” system. Based on this analysis, a coupled control strategy is designed by explicitly considering the interaction between rudder and propeller, enabling high-precision heading control.
II. System Composition
The “Black Pearl” paddle–rudder integrated Unmanned Surface Vehicle is a new-generation ocean observation platform capable of carrying various payloads, including meteorological stations, CTD (Conductivity–Temperature–Depth) sensors, Iridium communication modules, and dissolved oxygen sensors.
The surface float is equipped with solar panels that convert solar energy into electrical power for sensors, communication systems, navigation control systems, and the subsurface glider. The communication system receives target information and control commands transmitted from the shore-based monitoring center.
The subsurface glider is equipped with six pairs of hydrofoils, a compass, and the paddle–rudder integrated control system, which are mainly responsible for positioning and attitude control. The surface and subsurface units are connected by a 7-meter armored tether cable, which enables both power transmission and data communication between the upper and lower systems. The overall structure is shown in Figure 1.

Figure 1. Model of the “Black Pearl” Paddle–Rudder Integrated Unmanned Surface Vehicle
III. System Workflow
First, the shore-based monitoring system of HydrovoX remotely transmits target information to the main control system of the “Black Pearl” paddle–rudder integrated Unmanned Surface Vehicle. The line-of-sight guidance system then converts the target point or desired trajectory into a desired heading command, which is sent to the improved paddle–rudder coupled controller proposed in this study.
Based on the deviation between the target and the vehicle state, the controller adaptively adjusts the outputs of both the propeller and the rudder. It is capable of generating different rudder angles and propeller rotational speeds according to different target position requirements.
However, in practical marine operations, after receiving control commands, the actuators of the rudder and propeller exhibit inherent time-delay effects, meaning that they cannot immediately reach the commanded angle or rotational speed. Therefore, the actual system state is fed back to the paddle–rudder coupled controller through onboard sensors.
In addition, the “Black Pearl” Unmanned Surface Vehicle is subject to both external and internal disturbances during navigation, such as waves, ocean currents, mechanical errors, and sensor noise, which may cause deviations in heading information and discrepancies in control outputs. To address these uncertainties, the coupled controller is equipped with an adaptive function that adjusts in real time according to the external influences acting on the vehicle.
The overall control framework of the paddle–rudder coupled controller is shown in Figure 2.

Figure 2. Paddle–rudder coupled controller.
IV. Sea Trial Experiment
First, a land-based test was conducted to evaluate the computational performance of the main control system equipped with the paddle–rudder coupled controller. The computational efficiency was compared with that of a conventional PID controller to assess the performance of the proposed control strategy.
Table 1. Computational time of different controllers

The control period of the “Black Pearl” paddle–rudder integrated Unmanned Surface Vehicle is 3 seconds per cycle, indicating that the computational time of the paddle–rudder coupled controller fully satisfies the real-time control requirements of the system.
To verify the effectiveness, robustness, and paddle–rudder coupling capability of the proposed improved adaptive model predictive controller, sea trials were conducted in the nearshore waters of Qingdao.
As shown in Figure 3, the sea trial process is presented. Figure 4 illustrates the heading trajectory of the vehicle, while Figure 5 shows the navigation data, including heading deviation, rudder angle variation, propeller speed variation, and cross-track error variation.

Figure 3. “Black Pearl” paddle–rudder integrated Unmanned Surface Vehicle during the sea trial.

Figure 4. Navigation trajectory of the “Black Pearl” paddle–rudder integrated Unmanned Surface Vehicle.

Figure 5. Sea trial data of the “Black Pearl” paddle–rudder integrated Unmanned Surface Vehicle.
As shown in Figure 6, the navigation trajectory of the Unmanned Surface Vehicle equipped with a conventional controller is presented. Figure 7 illustrates the corresponding navigation data of the Unmanned Surface Vehicle using the conventional control strategy.

Figure 6. Navigation trajectory of the Unmanned Surface Vehicle equipped with a conventional controller.

Figure 7. Navigation data of the Unmanned Surface Vehicle with a conventional controller.
By comparing with previous navigation data of the Unmanned Surface Vehicle, it can be observed that the paddle–rudder coupled controller maintains high heading control accuracy while significantly reducing both the amplitude and frequency of rudder angle variations during propeller operation. This indicates that the proposed improved adaptive model predictive controller exhibits excellent coupling coordination capability between the rudder and propeller.
IV. Conclusions and Outlook
This study addresses the poor coupling performance in the controller of the new-generation “Black Pearl” paddle–rudder integrated Unmanned Surface Vehicle. By investigating the interaction between the rudder and propeller, an adaptive control strategy is designed that adjusts rudder angle and propeller rotational speed according to different control requirements.
The proposed method enables reduced propeller usage under favorable sea conditions, thereby lowering energy consumption. Under harsh sea conditions, propeller-assisted control is activated to achieve high-precision trajectory tracking and improved navigation performance.
(Source: Ocean Engineering, 2023, Vol. 289. References omitted. Copyright belongs to the publisher and authors. This content is reproduced for academic learning and communication with authorization.)
Key words:
Related News
How GNSS Positioning Solutions are Transforming Marine Surveying Techniques
How GNSS Positioning Solutions are Transforming Marine Surveying Techniques In the rapidly evolving field of marine surveying, the integration of GNSS (Global Navigation Satellite System) positioning solutions has revolutionized traditional methods of data collection and analysis. This article delves into how GNSS technology enhances precision, reliability, and safety in marine surveying, paving t
Nov 15,2026
Enhancing Deep Sea Navigation: The Role of Underwater Beacons in Positioning
The advent of underwater beacons has significantly revolutionized deep-sea positioning, a critical aspect of various marine operations, including scientific research, underwater construction, and search-and-rescue missions. These devices, often deployed to assist in locating submersible vehicles or underwater assets, utilize acoustic signals to provide real-time positioning data, which is vital fo
Nov 10,2026
A Comprehensive Guide to Selecting the Right Hydrophone Buoy for Marine Applications
A Comprehensive Guide to Selecting the Right Hydrophone Buoy for Marine Applications Table of Contents 1. Introduction to Hydrophone Buoys 2. What is a Hydrophone Buoy? 3. Importance of Hydrophone Buoys in Marine Research 4. Types of Hydrophone Buoys 5. Key Features to Consider When Selecting a Hydrophone Buoy 6. Environmental Factors Impacting Hydrophone Performance 7
Oct 21,2026
Understanding Shallow Water AIS Beacons: Enhancing Marine Safety and Navigation
Shallow water AIS beacons are specialized devices designed to aid navigation in shallow or restricted waters. AIS stands for Automatic Identification System, a vital communication tool for maritime safety that enables vessels to exchange information about their position, course, and speed in real time. These beacons serve as an important navigational aid, especially in areas where traditional navi
Oct 16,2026
Essential Marine AIS Beacon Transponder Maintenance Tips for Longevity
Essential Marine AIS Beacon Transponder Maintenance Tips for Longevity Table of Contents Understanding Marine AIS Beacon Transponders Importance of Regular Maintenance Routine Inspection Procedures Cleaning Your AIS Transponder Battery Maintenance and Replacement Software Updates and Firmware Management Troubleshooting Common Issues Professional Servicing: When to
Oct 11,2026
The Future of Wind Powered Unmanned Vessels: Revolutionizing Maritime Operations
In recent years, wind powered unmanned vessels have gained significant attention as a sustainable alternative in maritime operations. These vessels utilize wind energy as their primary propulsion source, which not only reduces reliance on fossil fuels but also minimizes greenhouse gas emissions. This environmentally conscious approach aligns perfectly with the global push for greener technologies
Oct 06,2026