04
2024-03-04
Results Brief | Ocean Ambient Noise Observation Study Using the “Black Pearl” Unmanned Surface Vehicle
Summary:
I. Introduction
Sound propagates efficiently in seawater, with low attenuation and long transmission distances, making it an effective means for ocean environmental observation. Acoustic observation relies on underwater acoustic data, which are typically acquired by deploying acoustic sensors beneath the sea surface. However, due to the complex and dynamic underwater environment, relying solely on fixed underwater acoustic sensor systems is often insufficient to meet operational requirements. Therefore, ocean ambient noise observation systems are commonly integrated with mobile marine observation platforms, such as research vessels and Autonomous Underwater Vehicles (AUVs).
Given the high operational cost and manpower requirements of research vessels, an increasing number of acoustic observation systems are being deployed on unmanned mobile platforms. By leveraging these platforms, ocean ambient noise observation systems can achieve longer endurance, improved safety, and greater operational flexibility.
Currently, common unmanned marine observation platforms include buoys, underwater gliders, and Unmanned Surface Vehicles. All of these platforms can carry acoustic sensing systems for ocean ambient noise observation and measurement. Buoy-based platforms equipped with acoustic payloads can perform multi-profile observations and communicate with shore-based stations via satellite when surfacing, enabling long-duration and multi-depth acoustic monitoring. However, their vertical motion relies on pump-driven systems, which may introduce interference to acoustic measurements.
Underwater gliders achieve vertical motion by adjusting buoyancy and utilize hydrofoils for propulsion, enabling large-scale ocean observations. When equipped with acoustic payloads, the operation of onboard motors during ascent and descent may also introduce noise interference.
As a new type of unmanned air–sea interface observation platform, the Unmanned Surface Vehicle offers advantages such as high controllability, long endurance, and extensive operational range. Since its propulsion is driven by wave energy, the platform introduces minimal self-noise to acoustic measurements. In addition, solar energy can be utilized to continuously power acoustic payloads, making the Unmanned Surface Vehicle highly suitable for long-duration and large-area ocean acoustic monitoring.
Therefore, the development of an intelligent ocean ambient noise observation system based on a Unmanned Surface Vehicle platform is of great significance for acquiring high-quality marine acoustic data.
II. Ocean Ambient Noise Observation System of the “Black Pearl” Unmanned Surface Vehicle
1. System Overview
The ocean ambient noise observation system based on the Unmanned Surface Vehicle is illustrated in Figure 1. The system consists of the following components: an underwater acoustic acquisition electronic module and a single-channel hydrophone; as well as a signal processing module, the main control module of the Unmanned Surface Vehicle, and a satellite communication module located on the surface float.
The platform is the “Black Pearl” Unmanned Surface Vehicle developed by HydrovoX During operation, the subsurface glider tows the underwater electronic module and the single-channel hydrophone forward.
To reduce platform self-noise and minimize the interference caused by platform motion on acoustic data acquisition, a heavy buoyancy chain is installed in front of the electronic module to provide vibration damping.

Figure 1. Block diagram of the Unmanned Surface Vehicle-based ocean ambient noise observation system.
2. System Workflow
The overall electrical workflow of the system is shown in Figure 2. A complete redundant storage architecture is adopted to ensure reliable acquisition and storage of acoustic data.
The underwater acoustic acquisition system, located in the subsea electronic module, converts the analog signals collected by the single-channel hydrophone into digital signals via analog-to-digital conversion. These data are then either stored locally on a memory card within the electronic module or transmitted to the main control module on the surface float via network communication.
The main control module performs direct storage or real-time processing of the received data and subsequently sends the processed results to the satellite communication module for transmission. The satellite communication module is responsible for relaying the data back to the shore-based system.
The main control module integrates multiple functions, including platform control, sensor data logging, and satellite communication relay. It can transmit ocean ambient noise spectra and other relevant information to the shore-based monitoring system via satellite links.
In addition to data transmission, control commands can also be sent remotely to the Unmanned Surface Vehicle through satellite communication. These commands enable navigation control, obstacle avoidance, and forwarding of acquisition instructions to the underwater acoustic system, such as activating or deactivating the hydrophone system and configuring its operational modes. Through such remote adjustments, the Unmanned Surface Vehicle’s acoustic acquisition system can effectively adapt to various ocean ambient noise observation scenarios.

Figure 2. Overall electrical workflow of the system.
3. Design of the Underwater Acoustic Acquisition System
Since the underwater acoustic acquisition system is primarily powered by the Unmanned Surface Vehicle platform, designing a low-power system is essential to extend platform endurance and enable wider-area and longer-duration ocean ambient noise measurements under limited energy conditions. In low-power design, both the platform’s operational consumption and the acoustic system’s consumption must be considered to define feasible design targets.
Taking the typical configuration of the “Black Pearl” Unmanned Surface Vehicle as an example, the platform has an energy storage capacity of 640 Wh, and its average power consumption for navigation and communication is approximately 1.8 W. Under conditions of no sunlight (e.g., overcast weather) and no additional electrical loads, the platform can operate continuously for about 15 days. To ensure continuous ocean ambient noise measurement for 10 days under such conditions, the total system power consumption should be around 2.6 W. This implies that the continuous power consumption of the acoustic acquisition system must be kept below 800 mW.
The acoustic acquisition system is primarily located below the sea surface and consists of a single-channel hydrophone and an underwater acquisition circuit protected within an electronic housing. This study mainly focuses on the design of the underwater acquisition circuit.
The underwater acquisition circuit is divided into two main parts:
- The front-end analog–digital mixed-signal circuit, responsible for acoustic signal conditioning and analog-to-digital conversion;
- The back-end storage and communication circuit, responsible for raw acoustic data storage and transmission.
The overall circuit design is guided by three key objectives: low power consumption, low self-noise, and long endurance. These goals are achieved through appropriate component selection, optimized PCB layout, and impedance matching techniques. The configuration of the underwater acquisition circuit is shown in Figure 3.

Figure 3. Configuration of the underwater acquisition circuit.
4. Design of the Underwater Acoustic Data Storage System
Due to the complex underwater environment in China’s coastal waters—such as uneven reefs and submerged fishing nets—towed underwater equipment faces significant risks. If only a conventional self-contained storage method within the underwater acoustic module is used, critical data may be lost in the event of accidents such as tether breakage, making recovery difficult and potentially leading to mission failure.
To address this issue, and to ensure reliable data recovery, long-term endurance, and improved system intelligence, a redundant data storage scheme tailored to the Unmanned Surface Vehicle platform and its low-power acoustic acquisition system is proposed. As shown in Figure 4, acoustic data are stored through three main pathways:
- An SD card within the underwater electronic module,
- An SD card in the surface platform’s main control module,
- A cloud-based server.
During operation, the underwater module prioritizes transmitting acoustic data to the SD card in the surface main control module for storage. Leveraging the multi-core and multi-threading capabilities of the main controller, the data are periodically processed—such as through Fourier transform and spectral level conversion—to generate ocean ambient noise spectra, which are then transmitted to the shore-based server via satellite communication.
When the storage capacity of the surface module’s SD card is reached, the data flow is redirected to a high-capacity SD card located in the underwater acquisition circuit. Meanwhile, periodic network transmission is activated to send data back to the surface module, where further processing is performed before being transmitted to the cloud server.
In addition, depending on operational conditions, the data flow path can be remotely configured via the shore-based control system. This enables flexible switching among three storage modes—underwater local storage, surface platform storage, and cloud storage—thereby forming a triple-redundancy data storage system that ensures the safety and reliability of data recovery.

Figure 4. Acoustic data transmission workflow.
III. Sea Trial Validation
The “Black Pearl” Unmanned Surface Vehicle-based ocean ambient noise observation system was validated through field sea trials conducted in December 2021 in the coastal waters near Qingdao. Ocean ambient noise data were collected at a sampling rate of 64 ksps.
During the sea trials, the acoustic data were stored in the signal processing module on the surface platform, thereby reducing the risk of data loss that could result from potential failure or loss of the underwater acquisition module.
Figures 5 and 6 present the raw time-domain waveform and the power spectral density (PSD) of the measured ocean ambient noise obtained during the sea trials, respectively.

Figure 5. Raw time-domain waveform of ocean ambient noise in the coastal waters near Qingdao.

Figure 6. Ocean ambient noise spectrum level in the coastal waters near Qingdao.
IV. Conclusions and Outlook
This study presents the design of an intelligent ocean ambient noise observation system based on a Unmanned Surface Vehicle platform, featuring low power consumption, redundant data storage, enhanced data security, and remote control capabilities. These features ensure the reliable and continuous operation of ocean ambient noise monitoring tasks.
Sea trial results demonstrate that the system’s self-noise level is lower than that of Sea State 0, enabling high-fidelity measurement of ocean ambient noise. The measured data are also consistent with previously reported results in the literature (Yang Zhiguo et al., Technical Acoustics, 2021), indicating that the system is both practical and reliable.
Overall, the proposed system meets the requirements for ocean ambient noise observation and shows strong potential for future applications in long-term, large-scale marine acoustic monitoring.

Key words:
Related News
How GNSS Positioning Solutions are Transforming Marine Surveying Techniques
How GNSS Positioning Solutions are Transforming Marine Surveying Techniques In the rapidly evolving field of marine surveying, the integration of GNSS (Global Navigation Satellite System) positioning solutions has revolutionized traditional methods of data collection and analysis. This article delves into how GNSS technology enhances precision, reliability, and safety in marine surveying, paving t
Nov 15,2026
Enhancing Deep Sea Navigation: The Role of Underwater Beacons in Positioning
The advent of underwater beacons has significantly revolutionized deep-sea positioning, a critical aspect of various marine operations, including scientific research, underwater construction, and search-and-rescue missions. These devices, often deployed to assist in locating submersible vehicles or underwater assets, utilize acoustic signals to provide real-time positioning data, which is vital fo
Nov 10,2026
A Comprehensive Guide to Selecting the Right Hydrophone Buoy for Marine Applications
A Comprehensive Guide to Selecting the Right Hydrophone Buoy for Marine Applications Table of Contents 1. Introduction to Hydrophone Buoys 2. What is a Hydrophone Buoy? 3. Importance of Hydrophone Buoys in Marine Research 4. Types of Hydrophone Buoys 5. Key Features to Consider When Selecting a Hydrophone Buoy 6. Environmental Factors Impacting Hydrophone Performance 7
Oct 21,2026
Understanding Shallow Water AIS Beacons: Enhancing Marine Safety and Navigation
Shallow water AIS beacons are specialized devices designed to aid navigation in shallow or restricted waters. AIS stands for Automatic Identification System, a vital communication tool for maritime safety that enables vessels to exchange information about their position, course, and speed in real time. These beacons serve as an important navigational aid, especially in areas where traditional navi
Oct 16,2026
Essential Marine AIS Beacon Transponder Maintenance Tips for Longevity
Essential Marine AIS Beacon Transponder Maintenance Tips for Longevity Table of Contents Understanding Marine AIS Beacon Transponders Importance of Regular Maintenance Routine Inspection Procedures Cleaning Your AIS Transponder Battery Maintenance and Replacement Software Updates and Firmware Management Troubleshooting Common Issues Professional Servicing: When to
Oct 11,2026
The Future of Wind Powered Unmanned Vessels: Revolutionizing Maritime Operations
In recent years, wind powered unmanned vessels have gained significant attention as a sustainable alternative in maritime operations. These vessels utilize wind energy as their primary propulsion source, which not only reduces reliance on fossil fuels but also minimizes greenhouse gas emissions. This environmentally conscious approach aligns perfectly with the global push for greener technologies
Oct 06,2026